Mineral-Cast-Cleaner As if by magic


Using mineral cast in the production of sanitary objects allows for new shapes and designs. In washbasins these new shapes frequently display large horizontal surfaces with only little slope. Here it is important that the cleaned surface preferably discharges every last drop to enable the water to drain properly without leaving limescale deposits. Like in the car wash where the water drops are removed from the paint during drying as if by magic. A comparable effect is achieved with the Mineral-Cast-Cleaner. This special cleaner gently removes limescale, soap and dirt deposits and gives the sanitary object permanent protection if applied on a regular basis. The water rolls off and the surface is maintained scratch-free and with lasting effect.


Product Information

Order Number

CRA 30261 EN




For daily cleaning and care of sandwich materials,
consisting of natural minerals and polyester or acrylic resins


Glossy or mat mineral cast surfaces,
mineral materials (solid surfaces) and polyester surfaces

Customer's Benefit

Thorough and gentle cleaning
Dirt-repellent due to beading effect
Preserves brilliant surfaces
Eco-friendly and bio-degradable
Pleasant scent

How to use

Apply cleaner on a moist and soft sponge or apply directly on the surface, rub well and allow to work briefly then rinse with warm water and rub dry


Do not use on limestone surfaces (marble)
Storage at +5° to 30°C, minimum durability 10 years


Storage at +5° to 30°C, minimum durability 10 years.


Spray bottle 750 ml

Frequently Asked Questions

» May other material / surfaces also be cleaned?

Good results will also be achieved on acrylic washbasins. Please also refer to the recommendations given by the manufacturer and first try for compatibility in an inconspicuous place.